PoolMasterpro2 - Automatic Pool Heating Controller by Dontek
- Current Stock:
- 1.00 KGS
- $0.00 (Fixed Shipping Cost)
What's including in This Listing
- 1 x Controller Unit (AquaSun2+ revision)
- 2.5m Pool sensor wire
- 25m Roof sensor wire
- Mounting screws and grommet
- User and install instructions
- 2 Year Warranty + 1 year extended
Dontek AquaSun2 Controller Specifications
- Sophisticated pump control combined with simple user operation
- Easy to install
- Adjustable temperature differential
- Manual and Winter mode
- Self-diagnostic system
- Marine grade UV sensor cable
- 2 Year Warranty + 1 year EcoOnline extended
- Australian Made
PoolMasterproTM 2 Controller for Solar Pool Heating Systems
The PoolMasterproTM 2 is an automatic digital solar controller with temperature adjustment, manual mode and winter mode features. Suits unglazed (non-glass covered) solar pool heating collector systems. This controller is used for setting up and an independent solar pool heating system controlling a dedicated solar pump. Comes with pool and roof sensor.
Independent System Controller Comparison
* Tropical Mode will not function on this unit in Queensland Tariff 33, as it does not have clock and battery backup to retain settings after outage.
System Plumbing Options
This controller is used for setting up an independent solar pool heat system controlling a dedicated solar pool pump. We always recommend Independent Systems, see definitions below or manual. These systems run a small independent pump, typically for 8 hours per day and are actually more energy efficient than systems running through the main filter pump which have to run the large filter pump for 8 hours per day just to pump the solar side. Of course independent systems require separate solar suction and return lines, whereas for older pool these might not have been installed. If that's the case you'll need to go with a plumbing configuration that taps into your existing filter return line to divert water to your roof. There are a few configurations that can be chosen, see below or manual. Most people that do not have independent solar suctions and return ports will choose a Manual/Timer System and place the main filter pump on a timer to run during the warmest part of the day. These manual systems can be automated down the track.
If you need to set up a specialized system like for a Booster/Retro Fit System (requires AquaSun V2 controller) or the Motorized Ball Valve System (requires AquaSun V7 controller), please contact us at EcoOnline.
Requirements and Product Limitation
- This controller is used for setting up an independent solar pool heat system controlling a dedicated solar pool pump. Note: type of system requires independent solar lines running into your pool. Non-independent type systems such as a booster type system or systems running through the filter pump will require a different controller.
- This controller comes with a 20meter wire for the roof sensor, please request a longer wire if required (ask for stock levels).
- Requires 14.5mm PVC pipe hole size for rubber grommet.