20Amp EcoOnline Solar Charge Controller/Regulator Kit (for Solar Charging Lead-Acid Batteries)

$57.20
SKU:
Reg 20Amp Kit
Condition:
New
Availability:
InStock
Weight:
0.40 KGS
Shipping:
Free Shipping

What's including in This Listing

  • 1 x 20Amp EcoOnlineTM Charging Regulator (1R/20Amp/24V)
  • 1 x 15m 4.0mm² single core wire
  • 1 x MC4 connector pair
  • 1 x In-line fuse holder with spare 30Amp fuse
  • 2 x Adhesive lined cross-linked polyolefin heat shrink
  • 1 x Pair Battery Alligator Clamps
  • 1 x EcoOnlineTM Install Manual
  • Warranty from an Australian Company
  • Unlimited tech support

 Charging Regulator Features

  • High efficiency PWM charging
  • Fully automatic battery charging
  • Charge Lead Acid Gel, Sealed or Flooded batteries
  • Battery voltage state LED indication
  • Temperature compensation
  • 12V/24V auto sensing
  • ON/OFF switch
  • Complete electric protection - Overheating /Over discharging / Over charging / Load overload / Load short circuit / PV short circuit / PV reverse polarity / Battery reverse polarity
  • IP30 dust proof enclosure

Regulator Technical Specifications

Regulator
Specifications
Nominal System Voltage
12 V / 24V
Battery Voltage Range
9V-16V / 18V-32V
Recommended Solar Panel
36 cell / 72 cell
Maximum Short Term Current
20A
Maximum Continuous Current
15A
Self-consumption
 ≤6mA
Temperature Compensation Coeff.
30mV/˚C/12V (at 25˚C)
Operating temperature
-10˚C to +45˚C
Enclosure
IP30
 Physical Dimensions
144mm x 75.8mm x 45mm


Warranty

EcoOnlineTM offers the following Warranties:

  • 3 Year Regulator Warranty

See Terms and Conditions page for further details.

20amp_regulator_and_fuseholder



For Novices - Setting up a Solar Battery Charging System

Want to start playing with solar? Please note a solar charging system must be sized right, for efficiency, reliability and safety. For your convenience we have created the following online interactive calculators to help you build the perfect set up the first time around:

  1. Solar Panel Sizing Calculator (this will help you understand the factors involved in sizing solar panels)
  2. Solar Regulator Calculator (this will help you understand the factors involved in sizing a regulator)
  3. Solar Wire Sizing Calculator (this will help you understand the factors involved in sizing wires gauges)

 Safety Requirements

  • Only use 12V “nominal” (36 cell) solar panels with this regulator. Or 72 cell panel(s) for a 24V system.
  • EcoOnline recommends solar panel wattages and connected loads should not exceed: 240W solar power (at STC for a 12V system) or 15Amp continuous load for the 20Amp regulator.
  • This regulator is to be used for charging Sealed, Gelor Flooded Lead-Acid typebatteries only. Not to be used for charging any other battery chemistries.
  • Check that the maximum current produced by the chosen solar panel(s) array can never exceed the maximum allowable charging current for the battery being charged.
  • Always use appropriate gauge wires. Never exceed the rated Ampacity (amprating) of a wire. Keep in mind that low voltage / high current wires situated in highly insulated environments cannot dissipateheat and will have a much lower Ampacity.
  • The appropriate fuse MUST be installed on the positive regulator to battery connection.
  • Do not expose this regulator to water and/or highhumidity and/or corrosive environments such as those involving marine applications.

Shipping Cost & ETA Estimate

For a shipping estimate, use the above calculator or just add this listing to your cart and click "View Cart" at the top right of this page, then "Estimate Shipping" on the cart page. The shipping estimated time of arrival (ETA) can be checked on our shipping calculator here. We ship from Melbourne Victoria.


Back to top